HW32: Project

  • Due Apr 26, 2018 by 11:59pm
  • Points 200
  • Submitting a file upload
  • File Types pdf
  • Available until Apr 27, 2018 at 11:59pm
This assignment was locked Apr 27, 2018 at 11:59pm.

This is the final project report except you will not have measurement results yet.  The better you do on this assignment, the better the final project grade will be.

Project Guidelines Adjustable Power Supply

If you are repeating this course, you need to completely redo this assignment or you will receive a zero for plagiarism.

Documentation guidelines Links to an external site.:

A sample template can be found here

Documentation Hall of shame  Links to an external site.

A sample report Links to an external site. based on voltage division that shows how a report should be put together.

Use of the symbols such as * / or ^ for multiply, divide, and exponent will result in an automatic zero.  Use Ã—, ÷ , and 102.

Read these notes (Links to an external site.)Links to an external site. on how to properly document LTspice schematics and waveforms.  Videos can be found here and here .

Located here are some examples of bad and good documentation.

Use the online grammar checking tool ERRNET  before submitting The current ID and password are located here 

 Reports that do not meet the minimum standard will be rejected for grading.

1524812340 04/26/2018 11:59pm

Rubric

EE98 Project Report
EE98 Project Report
Criteria Ratings Pts
Report
threshold: pts
Edit criterion description
15 pts Report has the following sections Abstract, Introduction, Theory/Predictions, Methodology, Results/Discussion, Conclusions, and References. Report is prepared with a word processing program. There are no grammar or spelling mistakes.
8 pts Report has the following sections Abstract, Introduction, Theory/Predictions, Methodology, Results/Discussion, Conclusions, and References. Report is prepared with a word processing program. There are no grammar or spelling mistakes. There are few grammar or spelling mistakes.
4 pts Report has all sections. Report is prepared with a word processing program. There are many grammar or spelling mistakes.
0 pts Report is missing any section. Report is rejected for grading. Zero for whole assignment.
pts
15 pts
--
Additional Comments
Abstract
threshold: pts
Edit criterion description
5 pts Summarizes what was achieved and to what standard it was achieved.
0 pts Does not summarize what happened, or written in an inappropriate manner. Report Rejected for grading.
pts
5 pts
--
Additional Comments
Introduction
Introduction
threshold: pts
Edit criterion description
10 pts Explains why the work is important, has a literature review of what has been done before in the field. Equations, Figures, and Captions follow documentation standards. Figures and equations are well explained. Figures are easy to read.
8 pts Mostly explains why the work is important, has a literature review of what has been done before in the field. Equations, Figures, and Captions follow documentation standards. Figures and equations are mostly well explained. Figures are easy to read.
0 pts Anything not to standard or missing.
pts
10 pts
--
Additional Comments
Theory
threshold: pts
Edit criterion description
20 pts Equations are appropriately derived, not too little or too much information. References are cited giving credit for the starting theories, or theories used. Systems and sub systems are explained without too little or too much information. The results that are expected from theory are presented.
16 pts Same as full marks, except there might be too much or too little detail, or some things are not quite clear.
0 pts Anything not to standard or missing.
pts
20 pts
--
Additional Comments
Procedure/Methodology
threshold: pts
Edit criterion description
20 pts A guide to what was done is presented. Software used with version number is present. Equipment used is listed with tolerance. Parts are listed with tolerances. Schematics are easy to read. Every part number, type and value can be read. Schematic in the report is the schematic that was used to create simulation results. Figure documentation rules are followed. Important parts or subsystems are highlighted or boxed and labeled. Color scheme does not distract from conveying proper information.
15 pts A guide to what was done is presented but has too much or little information. Some tolerances are missing.
0 pts Anything not to standard or missing.
pts
20 pts
--
Additional Comments
Results and Discussion
threshold: pts
Edit criterion description
20 pts Full Marks
0 pts No Marks
pts
20 pts
--
Additional Comments
Conclusions and Future work
threshold: pts
Edit criterion description
5 pts Full Marks
0 pts No Marks
pts
5 pts
--
Additional Comments
References
threshold: pts
Edit criterion description
5 pts Full Marks
0 pts No Marks
pts
5 pts
--
Additional Comments
Total Points: 100 out of 100